Description
Hirayama HV-50 Upright Autoclave (50 Liter)
Space-saving design with lid opening upward.
Programmable auto-start for initiating a cycle up to 1 week later.
Dual-sensing lid interlock prevents lid opening when the chamber is pressurized or when temperature exceeds 97°C.
Automatic air purging by a microprocessor prevents over-pressurization during a cycle.
One-touch lever to easily open and close chamber lid.
Programmable rate of steam exhaust.
Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly.
In-process display shows status and progress of sterilization cycle.
Agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature.
Unique accessory: Floating sensor to monitor load temperature.
Sterilization timer is activated only when load temperature reaches set temperature.
Agar melting mode for rapidly melting agar and maintaining it at liquid temperature, or for a hot and faster start-up
Memory backup system retains user-programmed parameters even in case of power failure.
Specifications:
MODEL: HV-50
TEMPERATURE:
Operating Range: 105ºC to 135ºC
Display Range : 137ºC
Warming Range: 45ºC to 60ºC
Agar Dissolution: Heating at 60ºC to 100ºC for up to 1 hour (temperature and time programmable), followed by 45ºC to 60ºC (programmable for up to 20 hours to prevent coagulation)
GAUGE PRESSURE:
Operating Range: 3 to 30 psi (0.02 to 0.206MPa)
Maximum Allowable : 38 psi (0.26MPa)
TIMER: 134lbs
Sterilization: 1 to 250 minutes
Delayed Auto-start: Program autoclave to start 1 minute to 7 days later
DIMENSIONS:
20″ x 21″ x 41″(51 cm x 53 cm x 104 cm)
50 liters 11.8″ x 28.0″ (30 cm x 71 cm)
ACCESSORIES:
Stainless steel: Mesh wire baskets, buckets (pails), and round test tube racks
Factory or field installed: Floating (load) sensor, digital printer, and data logger
POWER:
Source: 120V, 50/60 Hz (220V/240V available)
Consumption: 2000 watts (20000VA)
