Description
Dionex ICS-6000 HPIC System
The modular Thermo Scientific Dionex ICS-6000 HPIC system isn’t a highly configurable ion chromatography (IC) system with high pressure capabilities. It enables you to develop and run different methods for a single sample or for different samples simultaneously. The robust design of this system enables operation at up to 5000 psi and produces consistent, reliable results. As a top-of-the-line ion chromatography system, the Dionex ICS-6000 HPIC system is designed to adapt to the needs of users and push the boundaries of what is possible in ion analysis.
Specifications:
Pump
Type: Dual-piston (in series), microprocessor controlled, constant 10 mm primary stroke length, variable speed isokinetic Eluent Precompression
Construction: Chemically inert, metal-free PEEK pump heads and flow path; compatible with aqueous eluents of pH 0–14 and reversed-phase solvents
Pressure range: Analytical: 0–35 MPa (0–5000 psi)
Flow rate range: Analytical: 0.000–10.000 mL/min with settable flow increments at 0.001 mL/min, without changing pump heads. Optional heads allow flow up to 22.4 mL/min.
Flow rate precision: < 0.1%
Flow accuracy: < 0.1%
Pressure ripple: < 1% at 1.0 mL/min/typical, < 0.2% (with damper) at 10 µL/min, < 1.0% (without damper) typical
Pressure: None required
Piston seal wash: Standard, automatic operation
Vacuum degasser: Integrated, optional 1 channel for isocratic pump or 4 channels for quaternary pump
Gradient formation: Quaternary low pressure (analytical only) or electrolytic eluent generation at high pressure
RFIC-EG gradients: Analytical: 0.1–100 mM
Gradient profiles: Any combination of an unlimited number of linear, convex, and concave positive and negative gradient profiles
Gradient proportioning accuracy and precision: ±0.5 at 2 mL/min
Gradient mixing: Passive mixers for 2 mm and 4 mm i.d. columns, optional
Eluent generation: Optional eluent generation (RFIC-EG)
Eluent on/off valve: Electrically actuated, standard
Leak sensor: Optical, standard
System Software
Software: Chromeleon 7.2 CDS software, supports Microsoft® Windows® 7, operating systems
Automated procedure wizards: Standard feature
System smart startup and shutdown: Standard feature
Application templates: Standard feature
Automation support of 3rd party instruments: Fully controls over 300 different instruments from more than 30 manufacturers, including GC, HPLC, and MS
Customizable system control panels: Standard feature
Signal channels: Pump pressure
Data trending plots: All numerical device parameters
System status virtual channels: Standard feature
Power failure protection: Standard feature
System trigger commands and conditionals: Standard feature
Daily audit trail: Standard feature
Sample audit trail: Standard feature
System calibration storage: Factory, present and previous. Completely user selectable
Customized reporting: Standard feature with unlimited report sheets
GLP compliance: Optional
Physical specifications
Dimensions (h × w × d): 41 × 23 × 56 cm (16 × 8.75 × 21.5 in.)
Weight: SP: 20.4 kg (45 lb) — DP: 24.1 (55 lb)
Power requirements: 90–265 V ac, 47–63 Hz
Flow path: All polymeric (PEEK), anion or cation configuration
