Description
BGM LABTECH’s innovative absorbance microplate reader has the flexibility to perform assays quickly and easily in both microplates or via the built-in cuvette port. This spectrometer-based absorbance microplate reader captures a full UV/visible spectrum in less than 1 sec/well. Its speed, simple push button operation, and capacity to store individual assay protocols make the SPECTROstar Nano the leading microplate reader for absorbance measurements.
Specifications:
Detection Modes: UV/vis absorbance spectra
Measurement Modes: Endpoint and kinetic, Spectral scanning (absorbance), Well scanning
Microplate Formats:
6 to 1536-well plates, user-definable
LVis Plate with 16 low-volume microspots (2 μL)
Microplate Carrier: Robot compatible
Light Sources: High energy xenon flash lamp
Detectors: CCD Spectrometer
Wavelength Selection:
UV/vis absorbance spectrometer
Full spectra or 8 distinct wavelengths in < 1 sec/well
Spectral Range: 220 - 1000 nm; wavelength precision: ≤ 0.5 nm
Sensitivity:
Selectable spectral resolution: 1, 2, 5, and 10 nm
OD range: 0 to 4 OD; photometric resolution: 0.001 OD
Accuracy: < 1% at 2 OD
Precision: < 0.5% at 1 OD and < 0.8% at 2 OD
Linearity: ≤ 0.8% at 2.0 OD
Read Times: Full spectrum from 220 to 1000 nm in less than 1 sec/well
Shaking: Linear, orbital, and double-orbital with user-definable time and speed
Purge Gas Vent: System to inject an atmosphere or to pull a vacuum into the reader
Incubation: +3 °C above ambient up to 45 °C
Software: Multi-user Reader Control and MARS Data Analysis Software included, FDA 21 CFR Part 11 compliant
Dimensions: Width: 36 cm, depth: 50 cm, height: 16 cm; weight: 10 kg
Power Requirements:
External Power Supply
Input Voltage: 100 or 115 or 230 V, 50/60 Hz, auto ranging
Output Voltage: 24V DC / 2.5A
Power Consumption:
Standby 0 W (<0,5W)
Idle Mode 5 W
Measuring 15 W
Maximum 60 W
